Installing a Pre-Hung Door Just Got Easier
Learning how to Install a Pre-Hung Door?
…Lose the Shims
EZ-Hang is the original door installation system that allows you to ditch the shims for a frustration-free door installation, with a perfect fit every time. If you’re a DIY’er looking to install a prehung door, or a veteran contractor looking to increase speed and efficiency, EZ-Hang is for you!
Forget struggling with shims. EZ-Hang allows you to install a door in 3 simple steps.
Door installation has never been easier.
%
Reduction in Door Installation Time
Step 1
Step 2
Step 3
Draw a plumb line on the wall
Using a level, draw a plumb line on the wall, about half of an inch from the rough opening.
Attach the brackets to the frame of the door
Screw brackets to back of door frame using the 1/2″ screws provided, below each hinge and even with the edge of the door frame. Repeat on the knob side of the door and the top jamb.
Hang the door in the frame
Starting at the top hinge, match up one of the lines the bracket with the level line drawn in step one. Screw the door to the wall using the drywall screws provided. Work your way down the hinge side of the door.
EZ-Hang VS. Shims
EZ-Hang
- Hang a door in 5 Minutes
- Work from one side of the door
- No experience required
- Trim fits perfectly over bracket
- Hang a door by yourself
- Patented easy adujustment
Shims
- Average install time 20-30 min.
- Must move back and forth
- High learning curve
- Shims must be cut perfectly
- Requires 2 people
- Constant readjustment required
Installing a Pre-Hung Door Just Got Easier
Learning how to Install a Pre-Hung Door?
…Lose the Shims
%
Reduction in Door Installation Time
Check out this short video for a demonstration on just how quick and easy it is to use EZ-Hang brackets for your door installation.